ServicesDent Repair
Dent Repair in Selma
We work dents out of your car's panels with paintless methods when the factory paint has held, and with filler and refinishing when it hasn't. You get an honest read on which applies, a clean panel, and a call afterward to see how the repair is holding.

Choosing the Right Way to Fix a Dent
Not every dent needs paint. If the finish is unbroken and the metal hasn't been stretched too far, we can massage it back from behind the panel and keep the original factory paint. That paint is usually the best finish your car will ever have, so we protect it where we can.
When the paint is cracked, the dent sits on a sharp body line, or the metal is creased tight, the honest answer is conventional repair. We pull or hammer the panel close to shape, apply a thin skim of filler, prime it and refinish it to match. We'll tell you which route your vehicle needs and why, before any work starts.
After the repair, we follow up. We check how the panel looks once it has lived through a few weeks of sun and washing, and we explain how to care for fresh paint if the job included any.
What Dent Repair Includes
- Inspection under shop lighting
- We look at the dent under reflection boards and angled light, which show ripples a parking lot never will. We also check the paint edges for hairline cracks that decide the repair method.
- Paintless dent removal
- For intact paint, we reach behind the panel with rods or use glue-pull tabs on the face, easing the metal back in small passes. No sanding, no filler, no color matching.
- Conventional metal and filler work
- Deeper or creased dents are worked back as close to shape as the steel or aluminum allows. Filler is kept thin, because a thick layer can crack with heat and age.
- Refinishing when it's needed
- If paint is part of the repair, it is matched, blended into neighboring panels and clear coated. Our lifetime warranty on all paint work covers that finish.
- Removal and refitting of trim
- Door handles, moldings and inner trim panels come off when they block access, then go back on with new clips where the old ones break.
Signs a Dent Is Worth Fixing Now
Cracked or chipped paint in the dent
Once the paint breaks, bare metal is exposed. Rust can start under the edge and spread before you see it.
A dent on a body line or panel edge
These areas are stiffer and hold stress. They are harder to fix the longer the metal stays deformed.
A door or hatch that doesn't close smoothly
A dent near a hinge or latch can shift how the panel lines up. That points to damage beyond the surface and may call for a closer look at the structure.
You're planning to sell or turn in a lease
Dings and creases lower trade-in offers and can bring lease-return charges. A repair beforehand is often the more economical choice.
Several small dings across one panel
Shopping cart and door dings add up. Repairing them together usually takes less time than handling each one later.
How a Dent Repair Visit Goes
- 1
Talk it through by phone
Tell us where the dent is and what caused it. We'll arrange a time for you to bring your car to the shop.
- 2
Look and explain
We inspect the panel with you, point out any paint damage, and explain whether paintless or conventional repair fits. You get the estimate in writing, line by line.
- 3
The repair
Small paintless repairs are often finished the same visit. Jobs with refinishing take longer, since primer and paint need proper cure time before the car goes back on the road.
- 4
Final check and handover
We inspect the panel again under shop lights before you collect it. If paint was involved, we walk you through washing and waxing timelines.
- 5
We check back
A few weeks later we get in touch to ask how the repair looks. If something has changed, you bring it in and we look at it.

What Affects the Cost of Dent Repair
The price depends far more on the dent's location and the condition of the paint than on its size alone. We price each repair after seeing it, and the estimate shows what each line covers.
- Paint condition
- Intact paint usually means paintless repair and a lower cost. Broken paint adds prep, primer, color matching and clear coat.
- Location and access
- Dents on roof rails, near panel edges or behind bracing take more time to reach. Removing trim or headliners adds labor.
- Depth and creasing
- A soft, round dent moves back easily. A sharp crease has stretched the metal and needs more work to bring back flat.
- Panel material
- Aluminum panels, common on newer trucks and some sedans, are less forgiving than steel and take slower, more careful work.
Dent Repair Questions
Something not covered here? (559) 576-5577
Can every dent be fixed without repainting?
No. Paintless repair works when the paint is unbroken and the metal isn't stretched too far. Sharp creases, cracked paint and dents on some edges need conventional repair and refinishing. We'll show you what we see and tell you plainly which one your car needs.
Will the repaired area match the rest of my car?
With paintless repair, the original paint stays, so there is nothing to match. When we do refinish, we blend the new color into the panels next to it so the transition isn't visible in normal light. That paint work carries our lifetime warranty.
How should I care for the panel after a dent repair?
After a paintless repair, wash and wax as usual. If the panel was refinished, hand wash only for the first few weeks and wait before applying wax, since fresh clear coat is still curing. Parking in shade helps during a Central Valley summer. We go over the specifics at pickup and again when we check back.
Should I put a dent through my insurance?
It depends on the cost of the repair compared with your deductible. Many small dings cost less than a typical deductible, so paying directly can make sense. If the dent came from a collision or hail, our insurance claims page explains how we work with your insurer.
Do you repair dents in bumpers?
Plastic bumper covers behave differently from metal panels and are often reshaped with heat. Our bumper repair page covers that work in detail.
Let's Look at That Dent
Bring your car to our Selma shop and we'll give you a straight answer on how the dent should be repaired. Drivers from Kingsburg, Fowler and Parlier come to us for the same careful work.