ServicesBumper Repair
Bumper Repair in Selma
We repair cracked, scuffed and pushed-in bumper covers, check the parts hidden behind them and refinish the surface so it flexes like the original. When you pick up your car, we explain how to care for the new finish, then check back in the weeks that follow.

What bumper repair covers
Most modern bumpers are a painted plastic cover over a foam or honeycomb absorber and a metal or composite reinforcement bar. A low-speed tap in a parking lot may snap a hidden mounting tab while the painted face shows barely a mark. Another bump might scar the paint and leave the structure untouched. Knowing which one you have decides the repair.
Plastic can often be repaired. Cracks can be welded from the back, gouges filled with flexible filler and the cover reshaped with careful heat. When the plastic is torn through, badly stretched or missing mounting points, a replacement cover is the better answer, and we tell you that plainly rather than repairing something that will not hold.
Our work continues once your car goes home. We follow up to see how the finish is settling and give you simple care instructions for the first weeks.
What the work includes
Removing the cover to look behind it
We take the bumper cover off when the damage calls for it. That lets us see the absorber, the reinforcement bar and the brackets, which is where hidden damage usually sits.
Plastic welding and crack repair
Cracks and torn tabs are welded from the back with rod matched to the plastic type, then shaped smooth on the face. A repaired tab keeps the cover sitting tight against the fenders.
Flexible refinishing
Bumper plastic bends, so the paint has to as well. We use adhesion promoter on bare plastic and a flex additive in the coatings, then blend color into neighboring panels so the bumper does not stand apart. Our paint work carries a lifetime warranty.
Sensors and lights
If your vehicle has parking sensors, a radar unit or fog lights in the bumper, we remove and reinstall them with care. The estimate notes whether anything needs testing or calibration once the bumper is back on.
Fit and gap check
Before the car leaves, we check the gaps at the fenders, hood and trunk or liftgate so the bumper lines up the way it did from the factory.
Signs your bumper needs attention
A corner that hangs or flaps
A loose corner usually means a broken clip or mounting tab. Left alone, wind and vibration at speed can tear the cover further.
Cracks or white stress marks
Pale lines in the paint show where plastic has been bent past its limit. They tend to spread, especially through summer heat and cool nights.
Uneven gaps at the fender
If the gap between bumper and fender is wider on one side, a bracket or the reinforcement behind it may have shifted.
Scuffs down to bare plastic
Exposed plastic holds paint poorly once it weathers. Repairing scrapes before they fade and chalk gives a cleaner, longer-lasting finish.
Sensor warnings following a bump
A parking sensor that beeps constantly or goes silent once there has been contact can mean the sensor or its mount was knocked out of position.
How a bumper repair runs at our shop
- 1
Talk it through and bring it in
Begin with a phone call and describe what happened. We agree on a day for you to drop off your vehicle so we can see the damage in person.
- 2
Inspection and written estimate
We look at the cover, the fit and, where needed, what sits behind it. You get a written estimate that shows whether we recommend repair or replacement and why.
- 3
Repair, prep and refinish
We weld or replace, shape and sand, then prime and paint in stages with time to cure between coats. Color is blended so it reads as one surface in daylight.
- 4
Reassembly and final check
Sensors, lights and trim go back on, gaps are checked and the car is cleaned before you pick it up. We walk you around the repair.
- 5
Checking back with you
A little while past pickup, we call to ask how the bumper looks and sits. We also go over when it is safe to wax and how to wash the new paint gently.
What affects the price of bumper repair
Bumper work varies more than most people expect, because two bumpers with the same scrape can hide very different damage. We explain each line on the estimate so you can see what you are paying for. If more damage turns up once the cover is off, we talk with you before doing any added work.
- Repair or replace
- Welding and refinishing a cover can make sense for cracks and gouges. Torn or heavily stretched plastic usually needs a new cover, which changes the cost.
- Damage behind the cover
- A crushed absorber, bent reinforcement bar or broken brackets add parts and labor that a quick look from outside will not show.
- Paint and blending
- Metallic and pearl colors take more steps to match, and blending into fenders adds surface area to the job.
- Sensors and built-in parts
- Parking sensors, radar, washers and fog lights add removal and reinstall time, and some may need testing once the repair is complete.
Bumper repair questions
Something not covered here? (559) 576-5577
Can a cracked plastic bumper really be fixed?
Often, yes. Cracks and broken tabs can be welded from the back and finished smooth on the front. If the plastic is torn through or warped out of shape, we will tell you replacement is the sounder choice and show you why.
How close will the color be to my other panels?
Close enough that the eye passes over the joint. The color is built from your vehicle's paint code, then faded out into the fenders beside the bumper so there is no hard edge. Plastic and steel can take the same paint a little differently, so we compare the panels outdoors in natural light before anything goes back together.
Is the paint on my bumper covered by a warranty?
Yes. We give a lifetime warranty on all paint work, and that includes the refinish on your bumper.
How should I care for the bumper once it is repaired?
Hand wash for the first few weeks and keep pressure washer nozzles away from edges and seams. Hold off on wax or sealant until we tell you the paint has fully cured. We cover this at pickup and again when we check back with you.
Is it worth filing a claim for bumper damage?
That comes down to the extent of the damage and the size of your deductible. With our written estimate in hand, you can weigh the two and make the call yourself. If you decide to file, our Insurance Claims page covers how we work alongside your insurer.
Get your bumper looked at properly
Give us a call, describe the damage and we will agree on a day for you to drop the car off. You get a clear estimate, a careful repair and a check-in once the work is finished.